What Needs What

SUBs (MDS not needed)

(Draft, WIP)

For most MDS-only protections the following procedure is used:

Install Alcohol 120%
Navigate to "Image Making Wizard"
Select any drive
- What works best is unknown, but our "Kreon" drives seem to work well for most
Insert disc
Select Datatype at the bottom relevant to your protection
Select Read Speed (This is for the MDF, and doesn't matter for most cases)
In "Reading Options" you can select where you want your files saved
When ready, click start, you may be prompted for DPM read speed, what works best is unknown but 8x seems to work well.
If the DPM measurement fails in log output, you can cancel the dump.
- In this case, your drive will not work for this disc, try a different drive or swap to DT Pro for MDS dumping.
If the DPM measurement succeeds you can cancel the dump at this point if you'd like or let the MDF finish dumping.
- For most protections the MDF will be identical to ISO or ISO-converted BIN.
To check the quality of the DPM measurement:
- Navigate back to A120's main menu.
- Right click your MDS in the list to the right and select properties or drag the MDS in to that space.
- Select properties in the pop-up
- StarForce should look like [This]
- SecuROM should look similar to [This] with flat plateaus
- Sometimes they'll work even if they look bad, but this can be a good indicator.