Flashing Asus BW-16D1HT firmware
From Redump Wiki
Olofolleola4 (Talk | contribs) |
Olofolleola4 (Talk | contribs) |
||
| Line 11: | Line 11: | ||
* SATA controller in IDE mode(?) or USB to SATA Controller (olofolleola4 tested this with JMicron [https://usb-ids.gowdy.us/read/UD/152d/2338 JM20337]) | * SATA controller in IDE mode(?) or USB to SATA Controller (olofolleola4 tested this with JMicron [https://usb-ids.gowdy.us/read/UD/152d/2338 JM20337]) | ||
* A stable power source for both the ODD and computer. | * A stable power source for both the ODD and computer. | ||
| - | |||
'''Some notes before you begin''': | '''Some notes before you begin''': | ||
| - | After each file have been sucessfully flashed, it's a good idea to power cycle the ODD, either by disconnecting the SATA Power cable or by restarting the computer. | + | * After each file have been sucessfully flashed, it's a good idea to power cycle the ODD, either by disconnecting the SATA Power cable or by restarting the computer. |
| + | * Specific instruction for GNU/Linux(-libre): | ||
| + | <code>sudo wine '''ASUS_ODD_FW_Changer_-_'''FIRMWARE.exe</code> | ||
| + | |||
| + | '''ODDs''' | ||
* Asus BW-16D1HT with firmware 3.00 --> 3.10: | * Asus BW-16D1HT with firmware 3.00 --> 3.10: | ||
| - | First flash 3.10MK ( | + | First flash [https://anonymousfiles.io/SDz2wcbp/ 3.10MK] (SHA1: 70762635c4bbd324c4f2095dc336acb3b0764919), then flash [https://anonymousfiles.io/nsMLaA5u/ ASUS BW-16D1HT 3.02 (DE)] (SHA1: 4130578520c024218a1d99f86311525a05bccb60). |
* LG (HL-DT-ST) WH14NS40 (SVC CODE: NS50) 1.02: | * LG (HL-DT-ST) WH14NS40 (SVC CODE: NS50) 1.02: | ||
| - | First flash 3.10MK ( | + | First flash [https://anonymousfiles.io/SDz2wcbp/ 3.10MK] (SHA1: 70762635c4bbd324c4f2095dc336acb3b0764919), then flash [https://anonymousfiles.io/nsMLaA5u/ ASUS BW-16D1HT 3.02 (DE)] (SHA1: 4130578520c024218a1d99f86311525a05bccb60). |
To-Do: | To-Do: | ||
* Provide compressed archive with all the ASUS_ODD_FW_Changer files in the near future! | * Provide compressed archive with all the ASUS_ODD_FW_Changer files in the near future! | ||
| - | |||
| - | |||
[[Category:Dumping Guides]] | [[Category:Dumping Guides]] | ||
Revision as of 11:08, 15 March 2020
This page will one day be populated with instructions to flash with this firmware - if anyone ACTUALLY wants people to test it out.
Work has began and is under construction by olofolleola4.
The reason (as of 2020-Mar-15) why LG/Asus BD ODDs needs to be flashed into Asus BW-16D1HT 3.02 (DE - Downgrade Enable) (most probably ODDs using PCB: JB8 2015.05.08) is because that firmware supports Lead-in and the OpCode 0xf1[1][2] (normally used by Plextors to read the EEPROM, but in the case with Asus BW-16D1HT 3.02, it reads the cache) to read 1 sector[3] of Lead-out through cache.
Requirements:
- Microsoft Windows or GNU/Linux(-libre)
- SATA controller in IDE mode(?) or USB to SATA Controller (olofolleola4 tested this with JMicron JM20337)
- A stable power source for both the ODD and computer.
Some notes before you begin:
- After each file have been sucessfully flashed, it's a good idea to power cycle the ODD, either by disconnecting the SATA Power cable or by restarting the computer.
- Specific instruction for GNU/Linux(-libre):
sudo wine ASUS_ODD_FW_Changer_-_FIRMWARE.exe
ODDs
- Asus BW-16D1HT with firmware 3.00 --> 3.10:
First flash 3.10MK (SHA1: 70762635c4bbd324c4f2095dc336acb3b0764919), then flash ASUS BW-16D1HT 3.02 (DE) (SHA1: 4130578520c024218a1d99f86311525a05bccb60).
- LG (HL-DT-ST) WH14NS40 (SVC CODE: NS50) 1.02:
First flash 3.10MK (SHA1: 70762635c4bbd324c4f2095dc336acb3b0764919), then flash ASUS BW-16D1HT 3.02 (DE) (SHA1: 4130578520c024218a1d99f86311525a05bccb60).
To-Do:
- Provide compressed archive with all the ASUS_ODD_FW_Changer files in the near future!
