PlayStation 3 Dumping Guide

From Redump Wiki

Revision as of 17:14, 18 April 2018

Dumping guide for PS3 discs. For the forum discussion topic on PS3 dumping please see[1][2]. 3K3Y setup video here[3]

Dumping with a PS3 Console

Tools

Requirements: Soft/hardmodded PS3 running a CUSTOM firmware to dump the ISO to an external USB drive.

• PS3 with 3.55 OtherOS++ CFW
• MultiMAN 04.20.00 or higher
• 3k3y Keydumper v1.00
• GetKey r2

Dumping

NOTE: If the PS3 is running a cobra CFW and up-to-date multiMAN, you have to select from the XMMB menu mmCM > 'Switch to multiMAN mode' to make the the option 'Enable Direct Disc Access' appear in the start menu. Otherwise, the ISO that you create will be incorrect (decrypted).

Dumping the ISO using MultiMAN:

• In XMMB display mode, go to multiMAN > File Manager / mmOs.
• In the start menu, select 'Enable Direct Disc Access' (with the game disc inserted).
• Switch back to XMMB display mode. In the multiMAN column, select 'Refresh'.
• Now go to the Video column. It should now show a BD/DVD entry. Go to it, and select the 'Copy to ISO' option.
• You can now copy the ISO to your preferred destination. For the best speeds, select the internal HDD.
• Once it is dumped, you can use File Manager to copy/paste the ISO from the PS3ISO folder to your USB drive.
• If your destination is FAT, >4GB ISO's that are split into segments have to be combined again (using e.g. copy /b).

Dumping the metadata using any Linux variant:

• Use 3k3y Keydumper to create a 3Dump.bin file for your drive.
• Place GetKey and 3Dump.bin in the same folder. With the disc inserted, from a linux shell, run GetKey: ./GetKey 3Dump.bin >output.log
• The output.log file will contain the disk_key, disc_id and PIC.
• Please make sure that you provide the complete and correct metadata for each dump.

Dumping with a PC and Blu-Ray drive

Tools

Required: 3k3y ripp3r hardware and a "married" Sony PS3 Blu-Ray drive with sector 2 zeroing. sec

• 3k3y Ripper Device + IsoTools
• IsoTools
• GetKeyFrom3k3y
• DVDToImg

Dumping

• Place the game disc into the PS3 Blu-Ray drive connected to your computer (note: a standard BD-Rom drive will NOT work, it must be a PS3 drive).
• IsoBuster can be used for extracting the ISO:

Right click on Track 01, select Extract Track 01 -> Extract User Data (*.tao, *.iso, *.wav) menu item, then choose folder for extraction and press OK.

Dumping the ISO using 3k3y Ripper: Setting up: NOTE: If you have an extra/dumping-only drive, you can check "Use Default Keys" under Settings. The drive will not work with a PS3 console after this.

• Use 3k3y Keydumper to create a 3Dump.bin file for your drive.
• In IsoTools, press 'Load 3Dump' to load the 3Dump.bin file.

Dumping:

• Open IsoTools and it will show that the drive is detected/authenticated.
• Insert a disc and wait for it to be detected, then close IsoTools.
• Dump the disc using DVDToImg: dvdtoimg.exe driveletter dump.iso

Dumping the metadata using 3k3y Ripper:

• Open IsoTools and it will show that the drive is detected/authenticated.
• Insert a disc and wait for it to be detected.
• Press 'Rip Game' and select your destination to dump the ISO file.
• Wait until the ripping starts and then click Cancel to stop ripping.
• Dump the metadata using GetKeyFrom3k3y: getkeyfrom3k3y.exe IsoTools.iso
• Delete the IsoTools ISO file.