0800
From Redump Wiki
Revision as of 17:29, 5 August 2021 by Silasqwerty (Talk | contribs)
The 0800 series of optical disc drives are pulled from Xbox 360 consoles. Some models are compatible with Xbox 360 discs. What makes the 0800 dumping-compatible drives so special is that they're the only drives that can dump Xbox 360 discs which have XGD3 copy protection.
TODO: Most of this information needs to be verified for accuracy, and to see if it can be simplified in any way. Of particular note:
- Investigate if Samsung TS-H943 is a 100% capable drive for reading XGD3, 0800 firmware exists but apparently contains some limitations.
- Investigate if the Liteon DG-16D4S is 0800 compatible, or if only the Liteon DG-16D2S is.
- Find out the most reliable flashing setup, and if modern or 64 bit versions of Windows are viable to use.
Contents |
XGD3 Dumping-Compatible Models
- Phillips VAD6038 aka BenQ VAD6038[1]
- Liteon DG-16D2S
- Liteon DG-16D4S (Unconfirmed)
- Samsung TS-H943 (Semi compatible but NOT recommended)
- Hitachi GDR-3120L (NOT compatible)
- Hitachi DL10N (NOT compatible)
Choosing the Right Model of Xbox 360 and Removing its Drive
- Drives pulled from phat 360's are generally going to be easier to deal with.
- If you are going to removing the DVD drive from a phat Xbox 360 you already have, you can check the wire colors that are behind the faceplate for indication as to what DVD drive is inside: guide here.
- Ebay is a good source for working DVD drives pulled from Xbox 360's.
- In (approximate) order of easiness to flash:
- BenQ VAD6038 (This drive is flashable with no extra steps other than hooking up the power and sata cables).
- Liteon DG-16D2S (These drives require extra steps to recover the drive key, which is only required if you plan on eventually reusing the drive with the original Xbox it came with)
- Liteon DG-16D4S (This is a slim model DVD drive, and can be a bit tricky depending on the firmware version. Custom PCBs, soldering, etc...)
- To remove the drive from your Xbox 360, see the tutorial here.
Options for data connection from disk drive to PC
- All in one USB option: Xecuter X360USB PRO V2 - Buy (Provides power and data connections, this will be the easiest to use)
- Connecting Directly to PC Via SATA
- Only a handful of SATA chipsets are compatible for flashing the firmware. The VIA VT6421 is a PCI expansion card and is the preferred option for flashing via this method. Buy
- After the drive has been flashed with a VT6421 and JungleFlasher, it should be plugged into the regular SATA ports on your motherboard.
- UGreen USB to SATA Adapter + Sata extension[2] (required to fit inside UGreen adapter from ODD)
Options for powering the disk drive
The Xbox 360 disc drive has a proprietary power connector. You cannot power it with plain molex or SATA! If you're using the Xecuter X360USB PRO V2 then this section is unnecessary.
- Xecuter CK3 Pro
- Maximus 360 Power Dongle [3]
- DIY options are available.
- DVD drive power connector pinout.
- DYI Molex power adapter [4]
- SATA power can be used if your power supply has the 5th orange or grey wire that supplies 3.3v. A SATA extension cable should be used and spliced together with the original xbox 360 power cable.
- Picture of final DIY power adapter: Image
Flashing the Firmware
- The JungleFlasher app is used, download here. Make sure to move the correct firmware for your DVD drive into the "firmware" folder before starting.
- Jungle Flasher requires driver signature enforcement to be disabled, and the program must be run with admin rights. To disable driver signature enforcement on Windows 7, press F8 while Windows is booting to reach the Advanced boot menu, and then select the option to disable it. Driver signature enforcement will reset to normal if you reboot. See here for Windows 8 & 10
- Each drive model has its own specific method to unlock the drive, tutorials are available here.
