IBM PC

From Redump Wiki

(Difference between revisions)
Jump to: navigation, search
(First Draft)
(Data Only)
Line 42: Line 42:
#* Insert the disc into your FIRST drive
#* Insert the disc into your FIRST drive
#* Open ISOBuster
#* Open ISOBuster
-
#* Right-click on Track01 and select 'Dump as RAW'
+
#* Right-click on Track01 and select 'Extract Track 01' -> 'Extract RAW Data (2352 bytes/block) (*.bin, *.iso)'
#* Specify destination
#* Specify destination
#* Click Start
#* Click Start
Line 65: Line 65:
# Check the Images for Errors in CDMage
# Check the Images for Errors in CDMage
# Locate the Version #
# Locate the Version #
-
#  
+
#
-
 
+
===Mixed Mode (Data + Audio)===
===Mixed Mode (Data + Audio)===

Revision as of 20:17, 7 October 2013

This guide is currently under construction. Thank you for your patience!


Contents

Introduction

This guide is designed to show you how to preserve CD-based games created and released for the IBM PC-Compatible platform. This is a fairly comprehensive guide that aims to provide coverage for all known dumping methods and PC-based securities, so please use the Table of Contents to navigate to the specific topic you are interested in.

Checking Disc Protection

Required Software

  • BurnOut
  • ProtectionID

Tutorial

  • TO BE COMPLETED SOON!

Non-Protected Discs

Data Only

Required Software

Suggested Software (Optional)

  • CloneCD (Optional)
  • SubDump (Optional)

Overview

Non-protected, data-only discs are quite possibly the simplest type of disc to dump. Tools like ISOBuster and DiscImageCreator perform much of the heavy-lifting for you, so there is very little "manual" work that needs to be done to prepare the dump for verification. Simply follow the steps below to obtain a quality dump.

Tutorial

Before beginning, make sure that you have properly setup your tools and drives according to redump's standards. Also, it is redump's ongoing expectation that every dump is dumped at least two times using at least two different drives. Dumps that have not met these requirements will likely be rejected.

  1. Gently clean the disc's reflective surface.
    • Wipe down the disc to remove any loose debris, fingerprints, and smudges (always a good idea).
    • Make sure to use a gentle cloth and always wipe from the center out, towards the outer edge.
    • NEVER wipe a disc horizontally. Horizontal scratches increase the risk of inaccurate read errors, and can ruin your disc.
  2. Dump the disc using ISOBuster (1st Dump)
    • Insert the disc into your FIRST drive
    • Open ISOBuster
    • Right-click on Track01 and select 'Extract Track 01' -> 'Extract RAW Data (2352 bytes/block) (*.bin, *.iso)'
    • Specify destination
    • Click Start
  3. Dump the disc using DiscImageCreator (2nd Dump)
    • Insert the disc into your SECOND drive
    • Navigate to the DiscImageCreator folder, and shift-right-click on the folder and select 'Open Command Here'
    • Type 'DiscImageCreator.exe -rall [driveletter] [drivespeed] [trackname]' to begin dumping (example: 'DiscImageCreator.exe -rall h 8 track01')
    • NOTE: Unless you specify a filepath in the trackname, the tracks will be generated under the DiscImageCreator folder.
  4. Compare CheckSums / Search for Pre-Existing Hashes
    • Drag/drop the .bin/.iso/.img file onto HashCalc.exe (or open it manually) to view the checksum values.
    • Verify the MD5, SHA1, and CRC32 values
    • If they match...then the dump is consistent (yay!)
    • Next...copy/paste one of the MD5 values into Google's search engine to see if it exists anywhere on Redump's database.
      • If nothing appears, then you have a unique dump!
      • If a pre-existing match appears, then you most likely either have a verification or an alternate edition.
  5. Capture the PID Value.
    • Open ISOBuster (if not open)
    • Right-click on Track01 and select "Sector View"
    • Make sure that the 'RAW' option is unchecked, and enter '16' into the sector box and press 'enter'
    • This will jump to Sector 16, which is where the PID value can be found.
    • Scroll down to line 320, and copy lines 320-37F (usually just 320-370) and save it somewhere for later
  6. Check the Images for Errors in CDMage
  7. Locate the Version #

Mixed Mode (Data + Audio)

Recommended Software

  • COMING SOON!

Tutorial

  • COMING SOON!


Audio Only (CD Audio)

Recommended Software

  • COMING SOON!

Tutorial

  • COMING SOON!


Protected Discs

CD-Lock

Recommended Software

  • COMING SOON!

Tutorial

  • COMING SOON!

LaserLok

Recommended Software

  • COMING SOON!

Tutorial

  • COMING SOON!

PSX LibCrypt

Recommended Software

  • COMING SOON!

Tutorial

  • COMING SOON!

SafeDisc

Recommended Software

  • COMING SOON!

Tutorial

  • COMING SOON!

SecuROM / StarForce

Recommended Software

  • COMING SOON!

Tutorial

  • COMING SOON!

Smart-E

Recommended Software

  • COMING SOON!

Tutorial

  • COMING SOON!

Tages

Recommended Software

  • COMING SOON!

Tutorial

  • COMING SOON!
Personal tools