IBM PC: SafeDisc / SmartE protection

From Redump Wiki

(Difference between revisions)
Jump to: navigation, search
(Examples: Changed to a verified SafeDisc example that contains more information and added one SmartE example.)
Line 53: Line 53:
==Examples==
==Examples==
-
*[http://redump.org/disc/16501/ Star Wars - Jedi Knight - Jedi Academy (Europe) (En,Fr,De,Es) (Disc 1)]
+
*[http://redump.org/disc/20371/ Sid Meier's Civilization III (USA, Europe)] (SafeDisc)
 +
*[http://redump.org/disc/43148/ Zoo Tycoon 2 (USA)] (SmartE)
[[Category:Dumping Guides]]
[[Category:Dumping Guides]]

Revision as of 04:07, 15 July 2017

This guide will help you understand, identify and properly dump SafeDisc and SmartE protected discs.

Contents

Information & Features

SafeDisc is a protection format that places "corrupt" sectors near the beginning of a disc (usually in the 807 - 11920 sector range), although these sectors can be found just about anywhere. The key to dumping SafeDisc images correctly is to make sure that the corrupted sectors are dumped properly. It is also critical to dump the disc at least two times using at least two different drives (the more, the better). If everything goes well, all of your checksums will match.

SmartE is Microsoft's cheaper version of SafeDisc. It functions very much the same was as SafeDisc, and can be dumped the same way. The key difference is that you should always get a total of 10 errors in your SmartE image. If you get a different value than this, consult with one of the dumping experts on the redump forums. (NOTE: Plextor drives have been found to handle SmartE protection the best. Other drives can produce unreliable results.)

Detection

For this you need BurnOut or ProtectionID.

If you've installed the game, you can use SafeDisc Analyser to find out the exact SafeDisc version being used.

Dumping

Methods

There are two solutions (at present) for dumping SafeDisc games: (1) CloneCD, and (2) CD Manipulator. Both tools have been tested extensively, and have proven to be highly dependable in most cases (when properly configured). It's generally advisable to dump protected discs using different software AND different drives whenever possible in order to ensure that a thorough dump has been performed. That said, feel free to use whichever tool suits you best! Use the following to guide to setup your software:

  1. CloneCD
    • Create a custom profile (see link), and use it for all SafeDisc dumps.
    • You're all set! The software will handle the rest.
  2. CD Manipulator
    • Select "Read from CD to Image File"
    • Select the applicable drive from the drop-down list
    • Select "Single-Session mode (high compatibility)" in the drop-down menu
    • Specify where the image (.CUE/.CDM) will be saved
    • Check "Extended Settings" and then check "Ignore Read Errors" and "Auto Detect Read Channel". Uncheck everything else.
    • Set your "Data" and "Audio" speeds to 4x-8x, depending on your drive's compatibility.
    • You're all set! The software will handle the rest.

Data-Only

  1. Use BurnOut or ProtectionID to determine the SafeDisc version
  2. Use either CloneCD or CD Manipulator to dump the disc.
    • Always dump the disc twice, using different drives.
  3. Compare the checksums.
    • If they match...great!
    • If they don't match...check your settings; try different drives; try different tools; ask the community.
  4. Open the image in CDMage to get the SafeDisc error count (it's usually helpful to save the error log).
  5. You're now ready to submit your dump!

Mixed-Mode

Most SafeDisc titles are data-only. However, a few mixed-mode discs (data+audio) have been spotted in the wild. If your SafeDisc protected disc happens to contain audio tracks...it is CRITICAL that you dump the data portion of the image separately from the AUDIO tracks and then dump the AUDIO tracks in the normal way. This is because the suggested dumping software translates SafeDisc errors in a special way, and if any SafeDisc errors are present in the audio tracks they will need to be read "normally."

Subs & CCDs (Optional)

Sub-headers and CCD data can be extremely useful in disc replication and emulation. While redump does not presently archive this information, it is generally a good idea to capture this data for personal preservation purposes. Additional steps may be required for mixed-mode discs (i.e. discs containing CDDA). Search the forums or ask one of the MODs for help if you get stuck.

  • Use CloneCD to generate a valid CCD file. Be sure to use this custom profile.
  • Use Subdump to capture highly accurate sub-header data from the disc. Subdump is an internal development tool, and is presently only available upon request. Ask a Moderator if you have interest in using it.

Submission Data

Please include the following additional information with your SafeDisc submissions in addition to the regular Submission Information:

  1. SafeDisc version
  2. SafeDisc sector count (total errors)

Examples

Personal tools