Setting Up
From Redump Wiki
(Difference between revisions)
(Created page with "Before we start dumping we must first setup our tools properly. '''Work In Progress''' == Exact Audio Copy == * Start EAC; * Cancel the configuration wizard (if there is one); ...") |
|||
Line 4: | Line 4: | ||
== Exact Audio Copy == | == Exact Audio Copy == | ||
- | |||
* Cancel the configuration wizard (if there is one); | * Cancel the configuration wizard (if there is one); | ||
* Select the drive you want to use for ripping in the combobox; | * Select the drive you want to use for ripping in the combobox; | ||
- | * Open | + | * Open ''EAC → EAC Options'' or press '''F9'''); |
- | * Select the “Tools” tab and make sure 'activate beginner mode' is disabled; | + | ** Select the “Tools” tab and make sure 'activate beginner mode' is disabled; |
- | * Select the “Extraction” tab. For “Error recovery quality” choose High; | + | ** Select the “Extraction” tab. For “Error recovery quality” choose High; |
- | * Also in the “Extraction” tab, disable “No use of NULL samples for CRC calculations”; | + | ** Also in the “Extraction” tab, disable “No use of NULL samples for CRC calculations”; |
- | * Open the compression options (EAC → Compression Options or press F11); | + | ** Open the compression options (EAC → Compression Options or press F11); |
- | * Select the “Waveform” tab. For “Wave format” choose “Microsoft PCM Convertor”; | + | ** Select the “Waveform” tab. For “Wave format” choose “Microsoft PCM Convertor”; |
- | * For “Sample format”, make sure that “44,100 kHz; 16 Bit; Stereo” is selected; | + | ** For “Sample format”, make sure that “44,100 kHz; 16 Bit; Stereo” is selected; |
- | * In the same tab, make sure that “Do not write WAV header to file” is checked; | + | ** In the same tab, make sure that “Do not write WAV header to file” is checked; |
- | * Also make sure that “High quality (slow) is selected”; | + | ** Also make sure that “High quality (slow) is selected”; |
- | * In the “File extension for headerless files” box, enter “.bin”; | + | ** In the “File extension for headerless files” box, enter “.bin”; |
- | * Open | + | * Open ''EAC → Drive Options'' or press '''F10'''); |
- | * Select the first tab (“Extraction Method”) and click on “Detect Read Features”; | + | ** Select the first tab (“Extraction Method”) and click on “Detect Read Features”; |
- | * EAC should now start detecting the features of your drive; | + | ** EAC should now start detecting the features of your drive; |
- | * Select “Secure Mode” (on the same tab); | + | ** Select “Secure Mode” (on the same tab); |
- | * Click on the tab “Gap Detection” and set the detection accuracy to “Secure”; | + | ** Click on the tab “Gap Detection” and set the detection accuracy to “Secure”; |
- | * Set the Gap/Index retrival method to “Method A”. If you have problems detecting the gap, try changing to B or C (see “Ripping the audio tracks”); | + | ** Set the Gap/Index retrival method to “Method A”. If you have problems detecting the gap, try changing to B or C (see “Ripping the audio tracks”); |
- | * Change to the “Offset / Speed” tab and enable “overread into lead-in and lead-out”; | + | ** Change to the “Offset / Speed” tab and enable “overread into lead-in and lead-out”; |
- | * Look up the read offset value of your drive in the [http://www.accuraterip.com/driveoffsets.htm Accuraterip database]; | + | ** Look up the read offset value of your drive in the [http://www.accuraterip.com/driveoffsets.htm Accuraterip database]; |
- | * Write down the value for your drive, as we will use it later on in the guide. | + | ** Write down the value for your drive, as we will use it later on in the guide. |
+ | * Save this profile and keep it handy. | ||
- | == | + | == IsoBuster == |
- | * | + | * Open ''Options → File system settings''. |
+ | * In ''Display Time Stamp'' options group select ''Local time stamp'' option. | ||
+ | |||
+ | == CloneCD == | ||
+ | Use the following profiles: [http://www.mediafire.com/?pxltd0a37mmrjrq Download] | ||
+ | |||
+ | [[Category:Dumping Guides]] |
Revision as of 07:09, 24 October 2010
Before we start dumping we must first setup our tools properly.
Work In Progress
Exact Audio Copy
- Cancel the configuration wizard (if there is one);
- Select the drive you want to use for ripping in the combobox;
- Open EAC → EAC Options or press F9);
- Select the “Tools” tab and make sure 'activate beginner mode' is disabled;
- Select the “Extraction” tab. For “Error recovery quality” choose High;
- Also in the “Extraction” tab, disable “No use of NULL samples for CRC calculations”;
- Open the compression options (EAC → Compression Options or press F11);
- Select the “Waveform” tab. For “Wave format” choose “Microsoft PCM Convertor”;
- For “Sample format”, make sure that “44,100 kHz; 16 Bit; Stereo” is selected;
- In the same tab, make sure that “Do not write WAV header to file” is checked;
- Also make sure that “High quality (slow) is selected”;
- In the “File extension for headerless files” box, enter “.bin”;
- Open EAC → Drive Options or press F10);
- Select the first tab (“Extraction Method”) and click on “Detect Read Features”;
- EAC should now start detecting the features of your drive;
- Select “Secure Mode” (on the same tab);
- Click on the tab “Gap Detection” and set the detection accuracy to “Secure”;
- Set the Gap/Index retrival method to “Method A”. If you have problems detecting the gap, try changing to B or C (see “Ripping the audio tracks”);
- Change to the “Offset / Speed” tab and enable “overread into lead-in and lead-out”;
- Look up the read offset value of your drive in the Accuraterip database;
- Write down the value for your drive, as we will use it later on in the guide.
- Save this profile and keep it handy.
IsoBuster
- Open Options → File system settings.
- In Display Time Stamp options group select Local time stamp option.
CloneCD
Use the following profiles: Download