Setting Up
From Redump Wiki
Before we start dumping we must first setup our tools properly.
Work In Progress
Exact Audio Copy
- Start EAC;
- Cancel the configuration wizard (if there is one);
- Select the drive you want to use for ripping in the combobox;
- Open the EAC Options (EAC → EAC Options or press F9);
- Select the “Tools” tab and make sure 'activate beginner mode' is disabled;
- Select the “Extraction” tab. For “Error recovery quality” choose High;
- Also in the “Extraction” tab, disable “No use of NULL samples for CRC calculations”;
- Open the compression options (EAC → Compression Options or press F11);
- Select the “Waveform” tab. For “Wave format” choose “Microsoft PCM Convertor”;
- For “Sample format”, make sure that “44,100 kHz; 16 Bit; Stereo” is selected;
- In the same tab, make sure that “Do not write WAV header to file” is checked;
- Also make sure that “High quality (slow) is selected”;
- In the “File extension for headerless files” box, enter “.bin”;
- Open the drive options (EAC → Drive Options or press F10);
- Select the first tab (“Extraction Method”) and click on “Detect Read Features”;
- EAC should now start detecting the features of your drive;
- Select “Secure Mode” (on the same tab);
- Click on the tab “Gap Detection” and set the detection accuracy to “Secure”;
- Set the Gap/Index retrival method to “Method A”. If you have problems detecting the gap, try changing to B or C (see “Ripping the audio tracks”);
- Change to the “Offset / Speed” tab and enable “overread into lead-in and lead-out”;
- Look up the read offset value of your drive in the Accuraterip database;
- Write down the value for your drive, as we will use it later on in the guide.
Isobuster
- Launch the program, select Options -> File system settings menu item, in Display time stamp options group select Local time stamp option.